Multi Function Hydraulic Busbar Processing Machine for Punching ,
Cutting and Bending
70Mpa Hydraulic Busbar Processing Machine for Punching , Cutting
and Bending EPCB-301
Hydraulic punching device:CH60,CH70, 300KN and 350KN had die
10.5mm,13.8mm,17mm,20.5mm
Hydarulic bus-bar bender: CB150D,CB200A, it has Cu/Al plate
150*10mm, and 200*12mm
Hydraulic copper aluminum bus-bar cutter, it has CWC150,CWC200,
with 200KN and 300KN cutting force, Cu/Al 150*10mm, and 200*12mm
Hydraulic electrical pump: ZCB6-5-AB, 750KW out put, 70Mpa.
Multi-function Busbar Processing Machine
This is a combination of a number of functions the body of
professional design, perfect to avoid consideration of human waste,
that is, provincial working hours, consistent with established
operating procedures for personnel engaged in handy, resulting in
high efficiency, high quality perfect work;
the form, appearance, easy to move the surface paint and rust
treatment by phosphoric acid skin mold, wear-resistant impact;
Three position valve guide precision and convenient operation
hydraulic pump with hydraulic table shows the working pressure to
avoid overloading,
Foot switch operation device, easy to use
environmental surface treatment table, after grinding and chrome
desk, showing accurate and stable table;
| Item number | 06232 | 06231A | 06231 |
| Model | EPCB-301 | EPCB-401A | EPCB-401 |
| Function | with three functions,cutting, punching and bending | punching, bending and crimping | with Four functions,cutting, punching and bending(horizontal and erective) |
Dimension of work table | approx.690x690x730mm | approx.690x690x730mm | approx.690x690x730mm |
Voltage single phase | 220V50HZ | 220V50HZ | 220V50HZ |
Rating oil pressure | 700kg/cm2 | 700kg/cm2 | 700kg/cm 2 |
| Bending force | 170KN/200KN | 170KN/200KN | 270KN |
Bending range | 150x10mm max/200x12mm max | 150x10mm max/200x12mm max | 125x12.5mm max |
| Cutting force | 200KN/300KN | 200KN/300KN | 200KN/300KN |
| Cutting rang | 150x10mm max/200x12mm max | 150x10mm max/200x12mm max | 150x10mm max/200x12mm max |
| Punching force | 300KN/350KN | 300KN/350KN | 300KN/350KN |
Distance from hole to sheet side | 95x110mm max | 95x110mm max | 95x110mm |
| Punch rang | φ10.5mmΦ13.8mm φ17mmΦ20.5mm | φ10.5mmΦ13.8mm φ17mmΦ20.5mm | 3/8"(Φ10.5mm),1/2"(φ13.8mm), 5/8"(φ17mm),3/4"(φ20.5mm) |
| Package | wooden case | wooden case | wooden case |
